Στο swiitol έχουν βγάλει σε προσφορά δυο Laser Engraving Machines. Πιο συγκεκριμένα, ο λόγος για τα Swiitol C18 Pro και C24 Pro με αξιόλογα χαρακτηριστικά και σημαντικές εκπτώσεις χάρη στα Early bird offer που τρέχουν. Παράλληλα με την καταχώρηση του email σου στο νέο αυτό κατάστημα λαμβάνεις 5% εκπτωτικό κswiitωδικό για την επόμενη φορά.
To Switol C18 Pro μπορείς να το αγοράσεις εδώ στα 512 ευρώ
Το Swiitol C24 Pro μπορείς να το αγοράσεις εδώ στα 664 ευρώ
Model: C18 Pro
Engraving ruler: 400x400mm
Electric power: 90W
Laser output optical power: 15-18W
Laser wave: 455 ±5 nm
Engraving accuracy: 0.01mm
Engraving Speed: Max. 30000mm/min (Ideal speed: 24000mm/min)
Net weight of equipment: 4.6kg
Data transmission type: USB connection
Focusing type: fixed focus laser, no focusing
Operating software: LaserGRBL, LightBurn, with Win XP/Win 7/Win 8/XP/Win 10 system
Laser focus: 0.08*0.08mm
Product material: circuit board V/PWM modulation board
Wire: 22#2P2.54 terminal reverse wire 80mm
Optical lens: φ6/glass
Fan: 12V
Laser beam pattern: spot
Working mode: pulse working
Working hours: 10000H
Working temperature: 0℃~70℃
Storage temperature: -40℃~85℃
Sintering temperature: 800℃
Materials that able to cut: basswood, pine, paulownia, plywood, yellow peach, mahogany, bamboo, kraft paper, plastic, leather, PCB version, alumina, non-reflective electroplated and lacquered metal, 304 mirror stainless steel, glass, ceramics, cotton , rock board, density board, kraft paper, non-transparent acrylic board, resin, artificial ox bone, rubber, high-density foam board, oil painting paper, A4 paper, leaves, etc.
Cutting Materials: kraft paper, non-woven fabric, hardwood, Paulownia, basswood, pine, bamboo chips less than 2MM, cork, low-density foam board, non-transparent acrylic, ABS, PP and other plastic sheets less than 2MM thick, sponge, etc.
Supported file formats: NC, BMP, JPG, PNG, DXF,
Power supply: 100-240V AC, 50/60HZ Output: 12V 5A
Και τα χαρακτηριστικά του C24 Pro
- Model: C24 Pro
- Engraving ruler: 400x400mm
- Electric power: 120W
- Laser output optical power: 20-24W
- Laser wave: 455 ±5 nm
- Engraving accuracy: 0.01mm
- Engraving Speed: Max. 30000mm/min (Ideal speed: 24000mm/min)
- Net weight of equipment: 4.6kg
- Data transmission type: USB connection
- Focusing type: fixed focus laser, no focusing
- Operating software: LaserGRBL, LightBurn, with Win XP/Win 7/Win 8/XP/Win 10 system
- Laser focus: 0.08*0.1mm
- Product material: circuit board V/PWM modulation board
- Wire: 22#2P2.54 terminal reverse wire 80mm
- Optical lens: φ6/glass
- Fan: 12V
- Laser beam pattern: spot
- Working mode: pulse working
- Spot size: 0.05*0.05mm
- Working hours: 10000H
- Working temperature: 0℃~70℃
- Storage temperature: -40℃~85℃
- Sintering temperature: 800℃
- Materials that able to cut: basswood, pine, paulownia, plywood, yellow peach, mahogany, bamboo, kraft paper, plastic, leather, PCB version, alumina, non-reflective electroplated and lacquered metal, 304 mirror stainless steel, glass, ceramics, cotton , rock board, density board, kraft paper, non-transparent acrylic board, resin, artificial ox bone, rubber, high-density foam board, oil painting paper, A4 paper, leaves, etc.
- Cutting Materials: kraft paper, non-woven fabric, hardwood, Paulownia, basswood, pine, bamboo chips less than 2MM, cork, low-density foam board, non-transparent acrylic, ABS, PP and other plastic sheets less than 2MM thick, sponge, etc.
- Supported file formats: NC, BMP, JPG, PNG, DXF,
- Power supply: 100-240V AC, 50/60HZ Output: 12V 5A
Ακολουθήστε το Techmaniacs.gr στο Google News για να διαβάζετε πρώτοι όλα τα τεχνολογικά νέα. Ένας ακόμα τρόπος να μαθαίνετε τα πάντα πρώτοι είναι να προσθέσετε το Techmaniacs.gr στον RSS feeder σας χρησιμοποιώντας τον σύνδεσμο: https://techmaniacs.gr/feed/.
